If this is your first visit, be sure to check out the Forum Rules.
You may have to register before you can post: click the register link above to proceed. Once you have completed Registration please log in to start viewing messages, select the forum that you want to visit from the selection below.
If this is your first visit, be sure to check out the Forum Rules.
You may have to register before you can post: click the register link above to proceed. Once you have completed Registration please log in to start viewing messages, select the forum that you want to visit from the selection below.
Would you like to react to this message? Create an account in a few clicks or log in to continue.



 
Project Mu Disc Rotors - Street Sports & Club Racing! ImagesCA81I23Q-1HomeGalleryLatest imagesRegisterLog in

 

 Project Mu Disc Rotors - Street Sports & Club Racing!

Go down 
AuthorMessage
gslrallysport
SPONSOR
SPONSOR
gslrallysport


Posts : 72
Join date : 2012-03-19

Project Mu Disc Rotors - Street Sports & Club Racing! Empty
PostSubject: Project Mu Disc Rotors - Street Sports & Club Racing!   Project Mu Disc Rotors - Street Sports & Club Racing! Icon_minitimeMon Aug 13, 2012 11:35 am

[You must be registered and logged in to see this image.]

[You must be registered and logged in to see this link.] and [You must be registered and logged in to see this link.] stocks the complete range of Project Mu disc rotors!

STREET SPORTS

[You must be registered and logged in to see this image.]

[You must be registered and logged in to see this link.]

The new Project Mu rotor for the entry level customer looking to improve the look and performance of standard brake packages. The CRD rotors are vented and slotted.

Structure - 1 Piece
Material - FC Cast Iron
Slots - 8 directional straight


[You must be registered and logged in to see this image.]

[You must be registered and logged in to see this link.]

This rotor is designed as a Top quality OE replacement part.

It is an economical option to replace your standard rotors for a higher quality component with slots for better performance. These slots are directional and the curved design is for low noise which is suitable for your road car.

The cooling vane design of the SCR Pure Plus 6 rotor is very similar to OEM designs. This is a design that is economical to manufacture and provides sufficient ‘rotor mass’ to handle all road conditions. This means you get an improvement from OEM, but at the right cost.

Manufactured in Japan using top quality cast iron to Project Mu specifications, these rotors are ideal for your street car.

Structure - 1 Piece
Material - FC cast iron
Slots - 6 Curved Slots


[You must be registered and logged in to see this image.]

[You must be registered and logged in to see this link.]

The SCR rotor is designed to be a cross over from high performance street to track. It is made from high-carbon and alloy cast iron and has an excellent structural qualities resulting in a very stable rotor. The vane design allows large volumes of air to pass through offering more stable disc performance at the higher temperatures seen on the track.

Along with this, the straight slot (x8) design offers high resistance to fade making this disc ideal for track use, drifting, rally and any high performance application.

Structure - 1 Piece
Material - High Alloy FC Cast Iron
Slots - 8 directional straight


CLUB RACING

[You must be registered and logged in to see this image.]

[You must be registered and logged in to see this link.]

The premium rotor in the Project Mu range, the SCR-Pro incorporates all features you will find in a race rotor – packaged to fit onto standard cars.

The cast iron has very high levels of carbon and alloy, 8 straight slots and an advanced core vane design resulting in very high heat transfer qualities. Additionally, the SCR-Pro is a two-piece design that comes assembled to anodized billet alloy disc hats making them lighter than EOM rotors.

The SCR Pro employs motorsport experience and technology that provides the highest possible heat transfer properties of all Project Mu rotors. The vanes are designed to create additional turbulence inside the rotor without compromising air flow which in turn transfers more heat from the rotor to atmosphere.

The disc itself is completed in black chrome to further increase life and resistance to distortion. Ideal for race, rally and drift applications or simply as a premium upgrade to your road car.

Structure - 2 Piece
Rotor - Carbon/Alloy Iron
Hat - Billet Aluminium
Slots - 8 directional straight


[You must be registered and logged in to see this image.]

[You must be registered and logged in to see this link.]

SCR-GT uses SCR-Pro rotors and technology with the addition of floating mounts. The floating system is used in motorsport applications to allow the rotor to move independently of the bell / hub which allows some movement at temperature.

The cast iron has very high levels of carbon and alloy, 8 straight slots and an advanced core vane design resulting in very high heat transfer qualities. Additionally, the SCR GT is a two-piece design that comes assembled to anodized billet alloy disc hats making them lighter than EOM rotors.

The SCR GT employs motorsport experience and technology that provides the highest possible heat transfer properties of all Project Mu rotors. The vanes are designed to create additional turbulence inside the rotor without compromising air flow which in turn transfers more heat from the rotor to atmosphere.

The disc itself is completed in black chrome to further increase life and resistance to distortion. Ideal for race, rally and drift applications or simply as a premium upgrade to your road car.

Structure - 2 Piece
Rotor - Carbon/Alloy Iron
Hat - Floating - Billet Alloy
Slots - 8 directional straight


For more information or to purchase any Project Mu Disc Rotor, contact the following distributors:

GSL RallySport
Ph: 1300 884 836 (within Australia)
Ph: +617 3188 7534 (International)
Email: [You must be registered and logged in to see this link.]
Web: [You must be registered and logged in to see this link.]
Address: Unit 5 / 14 Buttonwood Place, Willawong QLD 4110

Brakes Direct National Offices
Ph: 1300 724 943 (within Australia)
Ph: 09 951 5726 (within New Zealand)
Email: [You must be registered and logged in to see this link.].au
Web: [You must be registered and logged in to see this link.]

Brakes Direct State Branches
North QLD - Ph: (07) 4422 0303
South East QLD - Ph: (07) 3177 0806
NSW - Ph: (02) 9191 9387
ACT - Ph: (02) 6171 2025
VIC - Ph: (03) 9938 8221
TAS - Ph: (03) 6111 0500
SA - Ph: (08) 7070 1402
WA - Ph: (08) 6500 0151
NT - Ph: (08) 7999 7400
Back to top Go down
 
Project Mu Disc Rotors - Street Sports & Club Racing!
Back to top 
Page 1 of 1
 Similar topics
-
» Disc Brakes Australia (DBA) Brake Rotors!
» Replacement Disc Rotors for Alcon / PWR Brake Kits!
» DBA Brake Rotors - Street, 4000 & 5000 Series OEM and Slotted!
» Project Mu Brake Pads - Performance, Club Motorsport & Competition!
» Brake Fluid: Dot 3, Dot 4, Super Dot 4 and Racing!

Permissions in this forum:You cannot reply to topics in this forum
 :: SPONSORS CORNER :: GSL Rally Sport-
Jump to: